How to control the temperature and time to make the rubber reach its limit?
阅读次数：562 责任编辑： 那片海 所属栏目：产品聚焦 Time : 08-29 Reading times: 562 Responsible editor: That piece of jellyfish Affiliation: Product focus
橡胶接头是用于金属管道之间起挠性连接作用的中空橡胶制品。 Introduction: Rubber joints are hollow rubber products used for flexible connection between metal pipes. It consists of inner and outer layers of rubber, ply and traveller, which form a tubular rubber piece. After vulcanization, it is combined with metal flange or parallel joint loose sleeve.
Shanghai Luoying Pipeline Equipment Co., Ltd.
is a professional manufacturer of pipeline equipment. Rubber joints
are also the main products of our company. The types of rubber joints are also diverse. The most common are single-ball flexible rubber joints and reducing Rubber joints, flanged rubber joints, double ball rubber joints, clamp rubber joints, and other rubber joint products! And special balls can be customized according to customer requirements.
Rubber joints are hollow rubber products used for flexible connection between metal pipes. It consists of inner and outer layers of rubber, ply and traveller, which form a tubular rubber piece. After vulcanization, it is combined with metal flange or parallel joint loose sleeve. Not only can it reduce vibration and noise, but it can also compensate for thermal expansion and contraction caused by temperature changes. It is widely used in various pipe systems.
During the manufacturing process of flexible rubber joint products of Shanghai Luoying Company, the rubber joint products can be manufactured only after the rubber joint raw materials are vulcanized and subjected to various tests. The vulcanization of raw materials in rubber joints is the key to the manufacture of rubber joints. Generally, the temperature and time must be controlled during vulcanization so that different rubbers can reach the maximum elasticity and toughness limit and can play a good effect in the process of use. Responsible for the company's products and customers. The failure of rubber vulcanization generally leads to brittle or hard rubber. The elasticity and toughness of rubber joints are greatly reduced. Therefore, good vulcanization control equipment and testing equipment and accumulation of experience are the key.
The manufacture of semi-finished rubber joints is the key to the entire molding. Generally, there is no gas inside so that no bubbles will be formed during high temperature molding. The temperature control of mold molding is to ensure that rubber products cannot be over-vulcanized, which will reduce the elasticity and toughness of rubber. It is also the key to the manufacture of rubber joints. Generally, small-diameter rubber joints use high-temperature gas molding. Mechanical molds used for large-caliber molding require strict attention to temperature control. Therefore, workers are required to strictly and semi-finished rubber joints in accordance with the stipulated requirements. Each reinforcing steel wire should be in place so that the rubber joints can be concentrated under stress without tearing in use.
Shanghai Luoying Pipeline Equipment Co., Ltd. has more than 20 years of production experience. It has strict quality control from the production of rubber joints to finished products. It also uses special rubber to make special rubber joints, regardless of the choice of raw materials. From the manufacturing process of rubber joints, we have unique experience and solutions to ensure the quality of each rubber joint. However, Shanghai Luoying Pipeline Equipment Co., Ltd. has been a professional manufacturer of rubber joints for many years. Our company can process rubber. The types are also diverse, and the quality of our Shanghai Luoying products conforms to national standards. The rubber joint products sold are accompanied by a supply list and quality inspection report and a company quality inspection chapter. Know the specific data of each test, please feel free to use our products. Please contact the hotline at 021-62212627.
just looking around