Three different ways to connect rubber joints
阅读次数：486 责任编辑： 那片海 所属栏目：产品聚焦 Time : 08-21 Reading times: 486 Responsible editor: That piece of jellyfish Column: Product Focus
橡胶接头的分类有很多种，不同的特征有着各种不同的分类，有的是从外形分的，有的是从材质分的，而大多数的区分方法是根据连接方式区分的，一般我们分为：法兰式橡胶接头、卡箍式橡胶接头和丝扣式橡胶接头 Introduction: There are many types of rubber joints. There are different classifications of different characteristics. Some are divided by shape and some are made of material. Most of the methods are distinguished according to the connection method. Generally, we divide them into: Flange rubber joints, clamp rubber joints and threaded rubber joints
There are many types of rubber joints
. Different features have different classifications. Some are divided by shape and some are made of material. Most of the methods are distinguished according to the connection method. Generally, we divide them into: flanges Rubber joints, clamp rubber joints, and threaded rubber joints. These three types of rubber joints have their own installation areas and installation methods. Different connections are properly installed to achieve the best results.
Flanged rubber joints are most commonly used. In this life where there is a pipeline with a flange, in general, the installation inside the pipeline is flanged. Therefore, flanged rubber joints are the most common. At this time, you only need to face the holes of the flange, and then tighten the sword with the corresponding bolts and nuts to connect the sword. It should be noted that the screws are tightened diagonally. Destruction of sealing performance.
Clamp type rubber joint. This rubber joint is used for some simple pipe connections. This connection only requires the clamps at both ends of the ball to be closely attached to the two pipes connected. The simple connection is his Unique characteristics, but there are certain shortcomings. When installing the clamp rubber joint, pay attention to whether the clamps at both ends are secure. If necessary, you can add one clamp to two, which can be tight. Fixing itself and the pipeline, it can make the sealing better.
Thread-locked rubber joints. This type of rubber joint is mostly used for some thinner pipes of fans. The connection of thread-locks is a complex connection, but there are relatively few things to pay attention to. You only need to check the two at the time of purchase. Whether the structure of the end screw is extremely compact. The childhood wire cannot be completely sealed with both ends when twisted. This rubber joint will be better in terms of sealing and pressure. A large part of the reason also comes from the installation. The environment of the area.
Shanghai Luoying Pipeline Equipment Co., Ltd.
has more than 20 years of production experience. It has strict quality control from the production of rubber joints to finished products. It also uses special rubber to make special rubber joints, regardless of the choice of raw materials. From the manufacturing process of rubber joints, we have unique experience and solutions to ensure the quality of each rubber joint. However, Shanghai Luoying Pipeline Equipment Co., Ltd. has been a professional manufacturer of rubber joints for many years. Our company can process rubber. The types are also diverse, and the quality of our Shanghai Luoying products conforms to national standards. The rubber joint products sold are accompanied by a supply list and quality inspection report and a company quality inspection chapter. Know the specific data of each test, please feel free to use our products. Please contact the hotline at 021-62212627.
just looking around