非金属补偿器广泛应用于钢铁厂、冶炼厂、石油化工厂，火力发电厂、水泥厂及原子能电厂等排烟脱硫，除尘设备，空气加热，助流鼓风等设备的出入口处，它都大大优于金属伸缩节，因此深得用户的一致好批评，得到大力推广应用。 Introduction: Non-metal compensators are widely used at the entrances and exits of steel plants, smelters, petrochemical plants, thermal power plants, cement plants and atomic power plants, such as flue gas desulfurization, dust removal equipment, air heating, flow blasting and other equipment. Both are much better than metal telescopic joints, so they have won unanimous good criticism from users, and have been vigorously promoted and applied.
Non-metal compensators are
widely used in the entrances and exits of steel plants, smelters, petrochemical plants, thermal power plants, cement plants and atomic power plants, etc. It is superior to metal telescopic joints
, so it has won unanimous good criticism from users and has been vigorously promoted and applied.
Features: ⑴ can compensate for multi-dimensional directions. Various forms, large amount of compensation and long life; ⑵ can effectively compensate or eliminate installation errors; ⑶ low stiffness, low elastic reaction force; ⑷ high temperature range, good corrosion resistance; ⑸ can effectively isolate vibration and reduce noise .
The elastic element constituting its working body is a non-metal material, usually a fiber fabric, so it is also called a fabric compensator ( expansion
joint, expansion joint). There is also a rubber material. This material can be used in place of fiber fabrics in various other conditions, except that it can not meet the conditions of use at ultra-high temperature (above 400).
Non-metal compensators are
easily damaged: Compensator products can be classified by shape, such as spherical compensators, or by materials, such as non-metal compensators. In many compensator applications with different characteristics, netizens find that non-metal compensators are more likely to be damaged. Why is this? This is mainly a problem of the use environment.
The service life of the non-metal compensator is different due to the different use environment, because the structural material of the non-metal compensator is a soft fabric material. When fixing the screws, it is necessary to fix the skin cloth on the one hand, and the other One aspect is that the skin is compacted to seal, so that the pipeline will not leak. During the installation, the screws in the front will become loose after the screws in the back are tightened, which will cause the accumulated acid water to penetrate the screws and cause corrosion, thereby corroding the screw and seriously reducing the service life of the non-metallic compensator. Therefore, tighten the screws repeatedly during installation. In addition, during the operation of the non-metallic compensator, due to vibration and other reasons, loose screws will also appear, causing pipeline leakage and product damage. Sometimes due to the movement of the pipeline, after the tie rod is broken, the non-metallic skin will be broken directly, making it unable to operate normally.
The environment has a great impact on non-metallic compensators, so this requires everyone to do a better job of daily inspection and maintenance. On the one hand, it is to improve the safety of operation, and on the other hand, it can also timely find the problems of the compensator and make Effective processing.
Since its establishment, Shanghai Luoying Pipeline Equipment Co., Ltd.
has always pursued the business tenet of "survive by quality, develop by science and technology", the quality policy of "honesty, scientific and technological innovation, dedication and perfection" and a warm and thoughtful after-sales service system. All our employees in Shanghai Luoying welcome new and old customers to visit the factory! For details, please contact the hotline 021-62212627.