Shanghai Luoying Pipeline Equipment Co., Ltd.
is a professional manufacturer of pipeline equipment. Rubber joints
are also the main products of our company. The types of rubber joints are also diverse. The most common are single-ball flexible rubber joints and reducing Rubber joints, flanged rubber joints, double ball rubber joints, clamp rubber joints, and other rubber joint products!
The cracking phenomenon of flexible rubber joints, many users do not know how the product cracking is caused and how to solve this problem. The following content is the detailed content we have summarized for everyone!
The flexible rubber joint is connected by a ball and a flange, and the strength of the connection part is relatively low. If the glue method is not accurate, the strength of the joint will be lower, and cracks may occur. The length of the flexible rubber joint is not enough during the use of the flexible rubber joint. Forcibly exceeding the length of the link, the contraction range may be cracked at will. After the flexible rubber joint is installed, it can be stretched at other places in the pipeline. It may also crack. The flexible rubber joint may crack under the influence of outdoor severe weather, exposure to sunlight, etc., below the operating temperature. The flexible rubber joint used in the vulcanization process has poor rubber function or has failed self-sulfurization, over-polished, rusted wire rope, etc., the strength of the joint will be greatly reduced, and it may easily rise during use. Disconnection of joints. Requirements when the flexible rubber joint end face is reinforced with a traveller: When the flexible rubber joint end face is reinforced with a traveller, the traveller shall remain round and shall be located in the same plane of the same year.
Shanghai Luoying reminds customers that if they want to prevent the cracking of the flexible rubber joints, we must pay attention to protect them during normal use. According to the above operation, we can reduce the occurrence of fractures.
Shanghai Luoying Pipeline Equipment Co., Ltd. has more than 20 years of production experience. It has strict quality control from the production of rubber joints to finished products. It also uses special rubber to make special rubber joints, regardless of the choice of raw materials. From the manufacturing process of rubber joints, we have unique experience and solutions to ensure the quality of each rubber joint. However, Shanghai Luoying Pipeline Equipment Co., Ltd. has been a professional manufacturer of rubber joints for many years. Our company can process rubber. The types are also diverse, and the quality of our Shanghai Luoying products conforms to national standards. The rubber joint products sold are accompanied by a supply list and quality inspection report and a company quality inspection chapter. Know the specific data of each test, please feel free to use our products. Please contact the hotline at 021-62212627.