球探足球即时比分直播

Welcome to the official website of Shanghai Luoying Pipeline Equipment Co., Ltd. ! For details, please call 021-6221-2627

What causes the surface of the single-ball rubber joint to blister?

󰃯阅读次数:751 󰃳责任编辑: 那片海 󰃗所属栏目:产品聚焦 Time : 08-01 󰃯 Reading Count: 751 󰃳 Responsible editor: That piece of jellyfish Column: Product Focus

橡胶接头是用于金属管道之间起挠性连接作用的中空橡胶制品。 Introduction: Rubber joints are hollow rubber products used for flexible connection between metal pipes. It consists of inner and outer layers of rubber, ply and traveller, which form a tubular rubber piece. After vulcanization, it is combined with metal flange or parallel joint loose sleeve.

Rubber joints are hollow rubber products used for flexible connection between metal pipes. It consists of inner and outer layers of rubber, ply and traveller, which form a tubular rubber piece. After vulcanization, it is combined with metal flange or parallel joint loose sleeve. Not only can it reduce vibration and noise, but it can also compensate for thermal expansion and contraction caused by temperature changes. It is widely used in various pipe systems. The main material of single ball rubber joints is rubber. In rubber joint products, there will be internal or external foaming. Some are problems with raw materials, and some are not handled properly by workers when making balls. It is cooked. Some are not enough time to make mistakes. This is a raw bag. And what exactly caused them to do this? Is such a rubber joint defective? Can the rubber joint with air bubbles still be used? Let me explain the answer to this series of questions for everyone.
1. The quality of foaming agent, check whether the foaming agent is qualified within a limited period;
2. The plasticity of the rubber material is too low. Check whether the plasticity of the rubber material meets the standard. The plasticity is good for the low-level supplementary mixing and increase the plasticity pores.
3. The mixing temperature is too high, the foaming agent decomposes early, check whether the mixer discharge temperature is too high, the stick temperature is too high, and the rubber compound is scorched. Some rubber compounds can be mixed with a small amount due to the high mixing temperature. Addition of foaming agent to the processing industry;
4.If the rubber is parked for a long time or the temperature is too high, some foaming agents will be pyrolyzed and decomposed. The rubber should be back-chained for additional processing if it is parked for a long time;
5. The rubber vulcanization speed is too fast, the formula is adjusted, check whether the critical temperature of the vulcanizing agent and the decomposition temperature of the foaming agent are close, and coordinate with each other to make the vulcanization speed match the foaming speed.
The above 5 items are the main reasons for the surface packing of the single ball rubber joint, so we must take strict precautions during normal use, so that the single ball rubber joint can serve us for a longer time.
Shanghai Luoying Pipeline Equipment Co., Ltd. has more than 20 years of production experience. It has strict quality control from the production of rubber joints to finished products. It also uses special rubber to make special rubber joints, regardless of the choice of raw materials. From the manufacturing process of rubber joints, we have unique experience and solutions to ensure the quality of each rubber joint. However, Shanghai Luoying Pipeline Equipment Co., Ltd. has been a professional manufacturer of rubber joints for many years. Our company can process rubber. The types are also diverse, and the quality of our Shanghai Luoying products conforms to national standards. The rubber joint products sold are accompanied by a supply list and quality inspection report and a company quality inspection chapter. Know the specific data of each test, please feel free to use our products. Please contact the hotline at 021-62212627.
1427437836233_copy.jpg